SpaGuts The Balboa Spa Controller VS500Z Kit is configurable. Internal component circuits are setup to work together with your existing pump and ozone, so you do not have to do any internal wiring. OEM part number for this kit is 54219-Z. This controller operates on 110/220V (220V requires 4-wire service). The VS500Z controller is equipped with M7 technology which allows the heater to be mounted either at the suction or discharge side of the pump. Controller Dimensions are 12″ L x 11″ H x 4.5″ W (approx.). Heater Dimensions are 15″ L x 2″ Diameter (approx.). Topside Panel Dimensions are 4.25″ L x 1.5″ W (approx.). Topside Cover Plate Dimensions are 8.5″ L x 3.5″ W (approx.). This controller kit is a also a replacement option for the next part numbers: 54368hc1vs500z, 54368-01, 54368HC3, 54368HC2, 54368HC1, 3-70-0927HQ, 3-70-0823, CS6100B-U-WP, 58-138-2056, 55263-02 (VS612R1 System), 53551 or GVS500R1A (New System will Not strengthen Silent Sentry Lights), Leisure Bay VH-V120R-CCAJ System (Re-plumbing Required to New Heater; Imaginable Topside Retrofitting), Premium Leisure 55940 System or 55941 Board (Chip PVS500ZR1A), EP6500, 50-54219-Z.
Be sure that this fits by entering your model number.
One pump circuit, two speeds, 110/220V, 12A Max; circ pump circuit, 110/220V, 4A max (24hr when activated, requires 25 GPM); ozone circuit, 110/220V, 1A max
Audio/Video circuit, 110/220V, 2A Max (Constant Voltage); 12V 12W light circuit with socket and reflector that fits most existing light housing, 8ft cord
1.4/5.5KW, 120/240V Flo-thru incoloy high drift heater with M7 technology; stainless steel heater housing; No Pressure switch. heater can also be installed on suction or discharge side of pump
48 inch amp motor, circ pump and ozone cords; Mini oval topside panel, 52487; UL and ETL listed to your safety; freeze protection; high-limit protection; filtration mode; economy mode
Pair of 2 inch heater tailpieces with O-ring gaskets; topside cover plate, 11718; 1-year limited