Laings Titanium Heater 1.5kW/6kW. This Heater comes from Laing made for Watkins and is an after market part. This PDR Titanium Heater is the newest factory upgrade replacement that comes with both sensors pre installed. So no want to worry about by chance breaking the old sensors, plus they are brand new and up to date. Its double-pass sleek design replaces all prior to now discontinued heater styles. The double-pass feature efficiently heats the water in two stages. Approved for all 115 volt 1.5kW and 230 volt – 6kW installations for all 1995-now Hot Springs and Tiger River spa models. Your existing 3/4″ vinyl tubing will attach to this heater with no needed adjustments. This replacement heater doesn’t have a plug on the end of the power cord like on the 1995-1996 spas. In most applications, the heater is connected directly inside the spas keep watch over box. If your existing heater plugs in to the bottom of your keep watch over box, you may need the appropriate adapter. Note#1: This PDR (power-down-reset) heater eliminates the manual reset button, which means that that you never want to remove the equipment door to reset the heater. Simply power down the spa for 30 seconds by either tripping off the GFCI breakers in the sub panel (on 230volt models) or unplugging the spa (115volt models). This heater replaces all heaters in all 1995-now Hot Spring, Tiger River and Limelight hot tubs. Not a replacement for the 4kw heater similar to this. If heater is dry started you’ll have to reset the power with a purpose to reset the internal pressure switch. Power down the spa to reset this safety switch. If you spa has a low float issue this heater will turn itself off. Most issue with the heater are because of a float issue. Please insure good water float through the circ pump and filters.
Make sure this fits by entering your model number.
Free Pressure switch jumper included