SpaGuts brand T-Style bathtub heater, 1.5KW 110V. This is the 7.0 x 1.5 inch T-Style bathtub heater, which are universal and designed to be installed on the pressure side of the bathtub pump. This bath heater is generally meant to be used on 1.5 inch plumbing, but will also be used on 1.0 inch and 0.75 inch plumbing when the use of the fittings that are provided. Inside diameter is approximately 2.375 inch for the black heater split nuts. NOTE 1: If this bath heater is being installed directly on top of the pump discharge, make sure the outdoor thread diameter of the pump is approximately 2-3/8 inch (2.375 inch). The split nuts on this bath heater has an inside thread diameter of approximately 2-3/8 inch (2.375 inch), which is standard for 1.5 inch fittings. If the existing pump have different size threaded fittings, plumbing is required for any of our Bath Heaters. Replacement option for the following bath heaters: SG100-15UP, PH100-15UP, 46-355-1033, 46-355-1030 or PH100-A (1.0KW), 2-00-7514, CT100-BLP-ET, CT100, CFB8PP1-D012JUZ, 931211-20, 931211+20, 25-175-1211, GG931211+20, 12-784-7430, 2-00-5009, 935211-21, 2-00-0027, D1150-1302-G, Kholer 1219652, Hydro quip CFB8PP8-8001AU0 (1.0KW).Replacement option for the following brand bath heaters: American Standard, Protected-T-Heater, Hydro-Quip Compact Series Whirlpool Bath Heater, Jacuzzi Rapid Heat, Pure Heat. The usage of a SpaGuts brand bath heater helps to do away with the rapid cooling that occurs all over the operation of your whirlpool bath, providing you a continuous source of hot water and extending the pleasure of your jetted bath experience. This bath heater is generally to be used in jetted bathtubs up to 70 gallons. For more information, please see Installation Instructions in the installation tab above. NOTE: This bath heater is designed to take care of the current bath water temperature in the tub, and is not meant to heat water from cold to hot.
Make sure this fits by entering your model number.
SpaGuts P/N: 25-150-0003
Features: Stainless steel 1.5″ T-style heater; 1.5kw Incoloy heater element; Built-in pressure switch to activate heating; Automatic smart thermostat (104 degrees F limit); Reversible mounting; Heater on light; Hi-limit protection; Includes 1.5″, 1.0″ and 3/4″ fittings; 110V 3ft NEMA cord; Includes Complete Installation Instructions; UL Recognized for safety standards
The usage of a SpaGuts brand bath heater helps to do away with the rapid cooling that occurs all over the operation of your whirlpool bath, providing you a continuous source of hot water and extending the pleasure of your jetted bath experience. This bath heater is generally to be used in jetted bathtubs up to 70 gallons. For larger bathtubs and specific heater size requirements, refer to your jetted bathtub manufacturer for their recommendation.
This item comes with a 2 year manufacturer’s limited warranty from the original purchased date.
FREE SHIPPING TO THE 48 US CONTINENTAL STATES.